![[Unifive] AC adapter & switching power supply manufacturer](common/img/header-logo.svg){kind=logo}
UMVUA3018 P series peak load 1.5 sec compatible model
|
UMVUA3018 P series is an 18W medical AC adapter designed for peak load capability. It supports 2xMOPP for patient protection and 2xMOOP for operator protection, making it an optimal power supply model for medical devices. By supporting peak loads approximately twice its rated power, it is ideal as a power source for medical equipment that drives DC motors. Our medical power supply series, which meets the strict standards required for powering medical devices, is designed to be optimal for use in various medical environments. Product series name:UMVUA3018 P series peak load 1.5 sec compatible model |
|
Products details
| Size | L:70.0 W:38.0 H:57.0/mm |
|---|---|
| AC Input Rating | 90V-264V |
| DC Output Rating |
|
| Safety |
|
| Examples of use by purpose | Introduction of Products by Application (PDF) |
If you are looking for products other than the above specifications, please contact our sales department.
Contact form
The UMVU 18W P Series is a wall-mount AC/DC adapter (18W class) for medical equipment equipped with a peak power function. It supports peak loads of up to 180% of the rated output for 1.5 seconds, meeting high instantaneous load demands such as during medical device startup. Compliant with the medical safety standard 60601-1 and supporting 2xMOPP (Means of Patient Protection). Available in nine types: UMVUU3018 P / UMVUL3018 P / UMVUE3018 P / UMVUZ3018 P / UMVUA3018 P / UMVUK3018 P / UMVUR3018 P / UMVUF3018 P / UMVUG3018 P.
Compliant with Energy Efficiency Level VI (ErP / DoE) and equipped with standard protection circuits for short circuit, overvoltage, overcurrent, and overtemperature. Supports operation at altitudes up to 5,000m. As an LPS (Limited Power Source) compliant medical adapter, it is suitable for a wide range of medical equipment.
| UNIFIVE is chosen because: As a power supply manufacturer with over 35 years of development experience, we provide consistent support from specification review with mass production in mind, certification acquisition, production launch-up, to post-mass-production follow-up. Based on standard products, we offer flexible supply from small lots for prototyping and evaluation to small- and medium-scale production, and large-volume production according to quantity requirements. We also support semi-custom solutions and assist with power supply selection from the specification stage toward mass production adoption. |
Key Features
1) Peak Power Function (Up to 180% of Rated Output for 1.5 Seconds)
1.5-second peak load capability supports peak loads of up to 180% of the rated output. Ideal for applications requiring high instantaneous current, such as medical device startup or motor drive. Peak current varies by model; for example, the 5.0V 3.0A model supports a peak of 5.1A, and the 12.0V 1.5A model supports a peak of 2.7A.
2) Compliant with Medical Standard 60601-1 and Supports 2xMOPP
Compliant with the medical safety standard 60601-1 and supports 2xMOPP (Means of Patient Protection) as a patient protection measure. Designed for high safety as an embedded power supply for medical equipment.
3) Nine Wall-Mount Types
Available in nine types: UMVUU3018 P / UMVUL3018 P / UMVUE3018 P / UMVUZ3018 P / UMVUA3018 P / UMVUK3018 P / UMVUR3018 P / UMVUF3018 P / UMVUG3018 P. Plug configurations conform to various national and regional standards, supporting global deployment of medical devices.
4) Protection Circuits (Overtemperature Protection Standard)
Equipped as standard with short circuit protection / overvoltage protection / overcurrent protection / overtemperature protection.
5) Supports Operating Altitude up to 5,000m
Operating altitude up to 5,000m, suitable for medical equipment used in high-altitude environments.
6) Energy Efficiency (ErP / DoE Level VI)
Energy Efficiency Level VI (ErP / DoE) compliant. Meets EU ErP Regulation (Commission Regulation (EU) 2019/1782) and DOE (10 CFR Part 429 and 430) requirements. No-load power consumption is 0.1W.
7) EMC (Emission)
Compliant with FCC Part18-B, EN(CISPR)55011-B, VCCI-B, and BS EN55011.
8) Immunity
In accordance with EN60601-1-2 / BS EN60601-1-2 requirements, compliant with EN61000-4-2 / -3 / -4 / -5 / -6 / -8 / -11 immunity standards.
Effective Use Cases
- Designing power supplies for medical devices that generate instantaneous high loads (peak power) during startup or motor drive
- Selecting a peak power capable supply compliant with medical standard 60601-1 and supporting 2xMOPP
- Selecting a medical adapter with standard overtemperature protection
- Selecting a power supply suitable for medical equipment used at high altitudes (up to 5,000m)
- Designing equipment based on an LPS (Limited Power Source) compliant power supply
Applications
Widely applicable as an external power supply for medical equipment with peak power capability.
- Medical devices with high startup loads
- Medical equipment with motor or actuator drive
- Medical equipment used in high-altitude environments
- Medical devices with instantaneous current fluctuations, etc.
*The above are examples and do not limit applications.
Standards and Compliance
| Item | Description |
|---|---|
| Technical Standards | 60601-1 (medical standard), supports 2xMOPP |
| Efficiency | Energy Efficiency Level VI (ErP / DoE), compliant with EU 2019/1782 and DOE 10 CFR Part 429 and 430 |
| EMC (Emission) | FCC Part18-B / EN(CISPR)55011-B / VCCI-B / BS EN55011 |
| Immunity | EN60601-1-2 / BS EN60601-1-2, EN61000-4-2 / -3 / -4 / -5 / -6 / -8 / -11 |
| Protection Circuits | Short circuit / overvoltage / overcurrent / overtemperature protection |
| Peak Power | Up to 180% of rated output, peak duration 1.5 seconds, Duty 0.1 |
| Operating Environment | Input: AC100-240V (range: AC90-264V), 50/60Hz (range: 47-63Hz) / Operating temperature: 0-40°C (natural convection, sea level) / Storage temperature: -20-65°C (natural convection, sea level) / Operating & storage humidity: 5-95%RH (no condensation) / Operating altitude: up to 5,000m |
| Reference Models | 5.0V 3.0A (peak 5.1A) / 5.9V 2.5A (peak 4.3A) / 12.0V 1.5A (peak 2.7A) / 15.0V 1.2A (peak 2.1A) / 24.0V 0.75A (peak 1.4A) (output accuracy ±5%, no-load power consumption 0.1W) |
| Plug Types | UMVUU3018 P / UMVUL3018 P / UMVUE3018 P / UMVUZ3018 P / UMVUA3018 P / UMVUK3018 P / UMVUR3018 P / UMVUF3018 P / UMVUG3018 P (wall-mount, fixed plug, 9 types) |
| Dimensions | 70.00×35.00×48.00-66.30mm (varies by plug type) |
| Other | LPS compliant, RoHS 2 compliant |
Semi-Custom Support
For specification confirmation, quotations, or sample requests, please feel free to contact us. Examples of semi-custom support can be found on our customization case page.