UNBWT1050 Standard Power Supply

ProductsDetails

Download various documents

Characteristic Data

Estimated lifespan data

Temperature data

EMC data

Reliability Data and MTBF

RoHS (10 Substances) Non-Use Certificate

CAD data (STEP)

3D Diagram (PDF)

The UNOWT 50W Series is an open-frame switching power supply for industrial equipment (50W class, standard Products). The board size features a compact design of 2 inch x 5.2 inch, complies with the safety standard 62368-1, and conforms to PSE Appendix Table 8 (100V standard). It is available in 6 models ranging from DC5.0V~48.0V.

Based on the same board platform, you can choose from three types: board only, with chassis, or with chassis + cover. Depending on the internal mounting method of the equipment and requirements for electric shock and contact protection, only the enclosure specification can be changed later. In addition, by using the on-board trimmer potentiometer, the output voltage can be adjusted within a range of ±10%.

Enclosure Options (3 Types)

The enclosure specifications can be selected according to the suffix code of the model number. The electrical specifications are common.

The model number consists of "a symbol indicating a UNIFIVE developed product + series code + input voltage + output power + function symbol".

Key Features

1) Output voltage adjustable within ±10%

Using the on-board trimmer resistor (VR21), the output voltage can be adjusted within ±10% of the rated value. This allows fine-tuning to account for voltage drops on the load side and final adjustments on the actual device, expanding the range of applications where a standard model can be used as-is.

2) Operating temperature -10~+70°C, supports installation in 6 orientations

The operating temperature range is -10~+70°C, and the storage temperature range is -30~+75°C. The mounting orientation supports 6 positions (A~F), including the standard position, allowing flexible placement according to the internal layout of the equipment. Under natural convection, the load factor is 100% at -10~+50°C, 75% at +60°C, and 50% at +70°C.

Note: The allowable load factor varies depending on the combination of ambient temperature, mounting orientation, and cooling conditions (natural convection/forced air cooling). For derating curves based on actual operating conditions, please contact our sales department.

3) 2-inch x 5.2-inch Compact Board

The board dimensions are 132.0 x 50.0 mm (5.20 x 1.97 inches). The component height is 22.4 mm or less from the top side of the board and 3.0 mm or less from the bottom side. The mounting hole diameter is φ3.50 mm, and the mounting pitch is 122.0 x 40.0 mm. As a 50 W class control power supply, it is designed for easy installation in limited internal equipment spaces.

4) Specifications for installation environments of industrial equipment

The overvoltage category supports OVC III (altitude 2,000 m), and the operating altitude is up to 5,000 m. It is also compliant with the dust protection requirements of PSE Appendix 8.

5) Energy Efficiency Level VI Compliant and LPS Support

Energy Efficiency Level VI (ErP/DoE) compliant, and conforms to EU Commission Regulation 2019/1782 and US DOE 10 CFR Part 429 and 430. It also supports LPS (Limited Power Source), making it easier to meet requirements in secondary-side circuit design.

6) Equipped with 3 Protection Circuits, Up to 5-Year Warranty

This product is equipped with three types of protection circuits: Short Circuit Protection (SCP), Over Voltage Protection (OVP), and Over Current Protection (OCP). In addition, it comes with a warranty of up to 5 years, making it suitable for industrial equipment that requires long-term operation and easier maintenance planning. For details regarding warranty terms and conditions, please contact our sales department.

List of Representative Models

Output port: CN2 / The output voltage can be adjusted within ±10% using a semi-fixed resistor.
The above model numbers are without chassis (board only). With chassis: UNBWT1050; with chassis + cover: UNSWT1050.
Measurement conditions: Measurements are performed using an oscilloscope with a bandwidth of 100MHz. The output is bypassed at the connector with a 0.1μF ceramic disc capacitor and a 100μF low-ESR electrolytic capacitor to simulate system load. The cable length during ripple measurement is 150mm.

Common Specifications

Note: The safety standards obtained vary by model. Please contact our sales department for the certification status of individual models.

External Dimensions and Connector Specifications

Dimensional tolerance: +/-0.5mm. For dimensions and detailed drawings of the chassis type (UNBWT1050), please contact our sales department.

Main Applications

This product can be widely used as a control power supply built into industrial equipment. Leveraging its 50W class output, compact board design, and wide operating temperature range, it is suitable for the following applications.

• Power supply for control circuits in industrial and manufacturing equipment
• Semiconductor manufacturing equipment and peripheral devices
• Power supply for sensors and measurement units
• Installation inside control panels and distribution boards
• Auxiliary power supply for FA equipment and conveyor systems
• Equipment used in high-altitude areas or environments with large temperature fluctuations

If higher output is required, we can provide higher-wattage open-frame power supplies.

Semi-Custom Support

Output voltage and current, connector type and position, chassis shape, and the addition of harnesses can be semi-customized to match your equipment. Based on standard products, specifications can be optimized while reducing development time and initial costs compared to full custom solutions.

For specification confirmation, quotations, or sample inquiries, please feel free to contact our sales team. You can view examples of customization on the Customization Case Studies page.

An industry-leading lineup. You are sure to find the perfect power supply for your company. Download the comprehensive Products catalog ▶

View other Products