AC/DC Power Adapter vs. Battery Chargers: A Power Supply Manufacturer Explains Charging Control and Safety Standards

A typical AC/DC Power Adapter outputs a fixed voltage, while a battery charger controls the current and voltage according to the battery. As a power supply manufacturer, we explain where charging is controlled, the differences between IEC 62368-1 and IEC 60335-2-29, and how to choose the right device.

Key points of this page: A typical AC/DC Power Adapter is a power supply that provides a fixed voltage to a device. A battery charger is a power supply that charges a battery while controlling the current and voltage according to the battery's condition. The required charging control varies significantly depending on the type of battery. Therefore, a charger must be selected and designed according to the specifications of the battery being used, rather than based solely on its output voltage and output current. After confirming the battery type, number of cells, capacity, and specifications of the device's charging circuit, we propose a standard, semi-custom, or custom power supply.

This page explains the differences that device manufacturers' design, development, and purchasing personnel need to understand when selecting a power supply for charging, based on our development experience as a power supply manufacturer.

Differences Between AC/DC Power Adapter and Battery Chargers (Comparison Table)

The three main differences between AC/DC Power Adapter and battery chargers are the output control method, where charging is controlled, and the applicable safety standards.

A typical AC/DC Power Adapter provides constant voltage (CV) output. Constant voltage control maintains a consistent output voltage even when the load changes. A battery charger charges a battery by controlling the current and voltage according to the battery type and condition.

ItemTypical AC/DC Power AdapterBattery Charger
PurposeSupply power to a deviceCharge a battery
Output ControlConstant voltage (CV)Charging control tailored to the battery type (CC/CV control, multi-stage charging, etc.)
Where Charging Is ControlledIn the device or battery pack (when charging)In the battery charger
Main Protection FeaturesShort-circuit protection, overvoltage protection, overcurrent protection, etc.In addition to the protection features listed on the left, charging timer protection, battery fault indicators, etc. (depending on the model)
Main Safety StandardsStandards appropriate for the device's application (IEC 62368-1 for information technology and AV equipment, IEC 60601-1 for medical equipment, etc.)IEC 60335-1 and IEC 60335-2-29 may apply
Our ProductsStandard application-specific AC/DC Power Adapter, semi-custom power supplies, and custom power suppliesAC/DC Power Adapters for Lithium Battery Charging (12 W-200 W) and custom power supplies tailored to battery specifications

Why You Should Not Charge Batteries Directly with a Standard AC/DC Power Adapter

We do not recommend charging batteries directly with a standard constant-voltage (CV) AC/DC Power Adapter.

For example, lithium-ion batteries must first be charged at a constant current and then switched to constant-voltage charging once the voltage reaches a certain level. An AC/DC Power Adapter that only supplies voltage may result in overcharging or reduced battery life. Because the required charging control differs depending on the battery type, we will compare them in the next section.

Charging Control Differs by Battery Type (Comparison Table by Battery Type)

The control required for a charger varies depending on the battery type. The differences are not limited to the charging voltage. The charging process, full-charge detection method, temperature management, and handling after a full charge also differ.

ItemLithium-Ion BatteryLithium Iron Phosphate Battery (LiFePO4)Nickel-Metal Hydride/Nickel-Cadmium BatteryLead-Acid Battery
Nominal Voltage per Cell (Typical)Approx. 3.6-3.7VApprox. 3.2-3.3VApprox. 1.2VApprox. 2.0V (6 cells for a 12V system)
Charging Voltage per Cell (Typical)Typically 4.2V. Some batteries use 4.1V, 4.35V, or 4.4VApprox. 3.6-3.65VFull charge is not determined by a fixed voltageDepends on the battery type and application
Basic Charging MethodCC/CVCC/CVConstant-current (CC) charging and full-charge detectionCC/CV and multistage charging
Typical Charging ProcessPrecharge (when deeply discharged) -> Constant current -> Constant voltage -> Charging endsPrecharge -> Constant current -> Constant voltage -> Charging endsConstant-current fast charging -> Detect full charge and stop -> Top-up charging as neededBulk charging (constant current) -> Absorption charging (constant voltage) -> Float charging. Equalization charging may be added depending on the application
Full-Charge DetectionThe charging current falls below the specified value during the constant-voltage stageDecrease in charging current, timer, etc.Voltage drop (-Delta V), voltage plateau (0 Delta V), rate of temperature rise (Delta T/Delta t), maximum temperature, timer, etc.Absorption charging duration, decrease in charging current, etc.
Temperature ManagementExtremely importantExtremely importantExtremely important (also used for full-charge detection)Important (charging voltage must be adjusted according to temperature)
Handling After a Full ChargeDo not use continuous float or trickle chargingContinuous float charging is generally not usedTop-up charging at a low current may be used depending on the conditionsFloat charging is commonly used
Main Design RisksOvercharging, overvoltage, and abnormal temperaturesUsing the charging voltage intended for lithium-ion batteries without modificationOverheating and overcharging caused by incorrect full-charge detectionGas generation and reduced service life due to overcharging

Note: The voltages in the table are typical values. For actual charging voltage, charging current, and temperature conditions, follow the specifications provided by the cell or battery pack manufacturer.

As a general rule, chargers designed for different battery types are not interchangeable. Even among lithium-based batteries, a charger for lithium-ion batteries cannot be used as-is for lithium iron phosphate (LiFePO4) batteries. For nickel-metal hydride and nickel-cadmium batteries, the full-charge detection criteria must also be checked. Nickel-cadmium batteries exhibit a clear voltage drop (-Delta V) when fully charged, whereas nickel-metal hydride batteries show only a small voltage change, so full charge is determined by combining voltage monitoring with temperature changes and other factors.

Even for batteries of the same type, the recommended charging conditions vary depending on the battery manufacturer and model. Therefore, a charger should not be selected based solely on the output voltage and output current of an existing Products; it must be selected and designed to match the specifications of the battery being used.

Our services:After confirming the battery type, number of cells, capacity, desired charging time, and the specifications of the device's charging circuit and BMS, we propose a suitable charging power supply. A BMS (battery management system) is a circuit that protects the battery by monitoring its voltage and temperature. In addition to standard products, we offer semi-custom solutions that modify the output voltage, output current, connectors, and other features, as well as custom power supplies designed from the charging method onward. The settings required for charging lithium-ion batteries are explained in detail in What Is an MCU-Equipped Battery Charger?

Where to Control Charging: Four Configurations and How to Choose a Power Supply

When selecting a power supply for charging, where charging is controlled - in the device, battery pack, or charger - is just as important as the battery type.

An AC/DC Power Adapter used to charge a battery is commonly referred to as a "charger" or "battery charger." However, even when the same term is used, the functions required of the power supply differ depending on the configuration.

System ConfigurationRequirements for the External Power SupplyOur Recommendation
A. The device has an internal charging circuit (charging IC)Provide a stable supply of the specified DC voltage and powerA standard AC/DC Power Adapter or a semi-custom solution for output voltage, output current, connectors, and other specifications
B. The battery pack has a charging control circuit or BMSProvide the DC input required by the BMS or charging circuitA semi-custom or custom power supply matched to the voltage, current, capacity, and connector requirements
C. Charging is controlled by an external chargerCharging control appropriate for the battery typeAC/DC Power Adapter for charging lithium batteries (12W-200W), the UNDM 200W Series with multi-stage charging, or a custom power supply incorporating the charging method, voltage, current, and temperature detection
D. A specialized battery pack is usedSupport for the number of cells, capacity, BMS specifications, communication signals, temperature signals, and other requirementsReview the individual specifications and consider a semi-custom or custom power supply solution

For example, even if a device uses a lithium iron phosphate (LiFePO4) battery, the external power supply does not need to control charging if the device has an internal charging circuit. In this case, we provide an AC/DC Power Adapter that supplies power to the charging circuit. On the other hand, if the external power supply itself serves as the battery charger, charging control appropriate for the battery type must also be considered.

For information on selecting a power supply when the device has an internal charging circuit, see How to Choose an AC/DC Power Adapter. Please contact us even if you are not yet sure which configuration applies. We will recommend a suitable power supply based on the overall configuration of your device.

Differences in Safety Standards: IEC 62368-1 vs. IEC 60335-1 and IEC 60335-2-29

Power supplies used to charge batteries may be required to comply with IEC 60335-1 and IEC 60335-2-29, the particular standard for battery chargers, rather than IEC 62368-1 for information technology and audiovisual equipment.

The safety standards applicable to an AC/DC Power Adapter depend on the intended use of the equipment powered by the AC/DC Power Adapter. IEC 60335-2-29 differs from IEC 62368-1 in terms of required test items and structural constraints. Therefore, the applicable standard must be determined before beginning the design process. If the standard changes during the design process, the circuitry or structure may need to be reviewed.

Our AC/DC Power Adapters for Lithium Battery Charging (12W-200W) are designed to comply with IEC 60335-1 and IEC 60335-2-29. Please contact our sales department for information on the certification status of each model.

For Japan: PSE Technical Standards

We have experience developing AC/DC Power Adapter for charging batteries by applying Appendix 12 as the technical standards under the Electrical Appliances and Materials Safety Act. In this case, compliance with J60335-1 and J60335-2-29 was specified for safety. J60335-2-29 is the particular standard for battery chargers.

The relationship between Appendix 8 and Appendix 12 is explained in AC/DC Power Adapter PSE Revisions and Compliance with Appendix 12.

For the EU: Scope of the Ecodesign Regulation

In the EU, the new Ecodesign Regulation (EU) 2025/2052 will apply from December 14, 2028. In addition to external power supplies, this regulation also covers battery chargers. For upcoming models intended for the EU, we recommend checking the requirements early, including those for chargers. For details, see Guide to EU ErP Lot 7 (External Power Supply Regulation).

Related pages: As an example of how safety standards vary depending on the application, see Differences Between Medical and General-Purpose AC/DC Power Adapter. An overview of IEC 62368-1 is provided in What Is IEC 62368-1?.

Our Battery Chargers: Standard, Semi-Custom, and Custom Power Supplies

We offer a standard lineup of AC/DC Power Adapters for Lithium Battery Charging from 12 W to 200 W. We also provide semi-custom and custom power supplies for battery specifications not covered by our standard products.

Standard Products

You can compare the output ratings and configurations of each series on the AC/DC Power Adapters for Lithium Battery Charging page. The features of the UNDM 200 W Series are explained in the article introducing the 200 W desktop charger.

Semi-Custom and Custom Power Supplies

We design semi-custom or custom power supplies with the following specifications tailored to the battery and equipment requirements.

For chargers equipped with an MCU (microcontroller), charging control parameters can be configured through software. In addition to lithium-ion battery chargers, we also offer custom power supply solutions for chargers for nickel-metal hydride batteries, lead-acid batteries, and other battery types.

Development Case Study: AC/DC Power Adapter for Charging Fan-Equipped Workwear

We developed a fully customized AC/DC Power Adapter for charging the batteries of fan-equipped workwear to replace another company's Products. A key requirement for this project was to avoid changing the design of the device. We designed a new enclosure and DC plug and obtained new PSE certification under Appended Table 12 (J60335-1 and J60335-2-29). CC/CV control was specified as an electrical requirement.

Customer Feedback: "We thought it would be impossible to replace only the power supply without modifying the device, but you made it possible while retaining both the original shape and plug. Thanks to your support, we were able to begin mass production on schedule!"
(Development Representative, Fan-Equipped Workwear Manufacturer)

For more information, please see Fully Customized AC/DC Power Adapter Development Case Study for Fan-Equipped Workwear. Other examples are available on our Custom Power Supply Case Studies page.

Frequently Asked Questions

Is it incorrect to call an AC/DC Power Adapter a "charger"?

No, it is not incorrect. An AC/DC Power Adapter used to charge a battery is commonly referred to as a "charger" or "battery charger." However, when selecting a power supply, check whether charging is controlled by the device, battery pack, or charger. The basics of AC/DC Power Adapter are explained in What Is an AC/DC Power Adapter?

Can a lithium-ion battery charger be used with a lithium iron phosphate (LiFePO4) battery?

As a general rule, it cannot be used as is. Lithium iron phosphate (LiFePO4) batteries and lithium-ion batteries are both charged using the CC/CV method, but their charging voltages per cell differ. Using the charging voltage intended for a lithium-ion battery without modification may result in overcharging. Please inform our sales department of the charging conditions recommended by the battery manufacturer. We will propose a power supply that meets those conditions.

Are chargers for smartphones and laptops AC/DC Power Adapter or battery chargers?

Generally, chargers for smartphones and laptops are AC/DC Power Adapter that supply power. Battery charging is controlled within the smartphone or laptop itself. USB PD (USB Power Delivery) chargers communicate with the device to determine the output voltage, but the device controls the stages of battery charging. For details on USB PD, see Important Considerations When Designing USB USB PD compatible Devices.

Can an IEC 62368-1-certified AC/DC Power Adapter be used as a charging power supply?

Charging power supplies may be required to comply with IEC 60335-1 and IEC 60335-2-29. IEC 60335-2-29 differs from IEC 62368-1 in terms of the required test items and structural constraints. The applicable standards depend on the intended use of the equipment and the region where it will be sold. Please consult our sales department before starting your design. We can propose standard, semi-custom, or custom power supplies that meet the applicable standards.

Can a single power supply both power the device and charge its battery?

Depending on the device configuration, a single power supply can perform both functions. If the device has a charging circuit, the battery can be charged inside the device while power is supplied to it from an AC/DC Power Adapter. In this case, select the output rating of the AC/DC Power Adapter based on the total power required for both powering the device and charging the battery. We can determine whether a single power supply can be used for both purposes if you provide us with the device specifications. The advantages of using an AC/DC Power Adapter are also explained in Advantages and disadvantages of using an AC/DC Power Adapter versus using an Alternating Current power supply directly.

Can you also provide consultation on chargers for batteries other than lithium-ion batteries?

Yes, we can provide a custom power supply solution. Lithium iron phosphate batteries (LiFePO4), nickel-metal hydride batteries, nickel-cadmium batteries, and lead-acid batteries each require different charging processes and methods for determining when they are fully charged. Please provide our Sales Department with the battery type, manufacturer and model number, number of cells, and capacity.

Battery and Equipment Specifications to Provide When Consulting Us

If you provide the following information, we will work with you to determine a power supply configuration suitable for your battery and equipment. You can consult us even if not all items have been finalized.

Item to ConfirmReason for Confirmation
Battery TypeBecause charging control methods differ among lithium-ion, LiFePO4, nickel-metal hydride, nickel-cadmium, and lead-acid batteries
Battery Manufacturer and Model NumberBecause recommended charging conditions may differ even for batteries of the same type
Number of Cells (Series/Parallel Configuration)To determine the required charging voltage
Capacity (Ah)To determine the appropriate charging current
Desired Charging TimeTo determine the required charging power
Maximum Charging CurrentBecause it directly affects battery life and safety
BMS Availability and SpecificationsTo determine how much control should be handled by the external power supply
Presence of an Internal Charging Circuit in the EquipmentTo determine whether an AC/DC Power Adapter is sufficient or a dedicated charger is required
Presence of a Temperature SensorTo determine whether temperature-based charging control is required
Connector and PolarityTo determine the semi-custom specifications
Equipment Application and Required Safety StandardsBecause the required standards vary for medical equipment, industrial equipment, home appliances, and other applications
Regions Where the Product Will Be Sold and UsedTo determine the input voltage, certifications, and AC plug type

View AC/DC Power Adapters for Lithium Battery Charging

Inquire About Charging Power Supplies