![[UNIFIVE]AC/DC Power Adapter& Switching Power Supply Manufacturer](common/img/header-logo.svg){kind=logo}
UMONT3200
|
UMONT3200 is a 200W open-frame switching power supply for medical equipment. It complies with IEC60601-1, features 4000Vac dielectric strength, and supports 2xMOOP (Means of Operator Protection). With dual fuses on both the L and N lines, it eliminates the need for additional components such as upstream fuses or isolation transformers, making it an optimal built-in power supply solution for medical devices. ProductsSeries Name:UMONT3200 |
|
.png)
ProductsDetails
| Size | L:127.0 W:76.2 H:36.6/mm |
|---|---|
| AC Input Rating (AC Input Rating) | 90V~264V |
| DC Output Rating (DC Output Rating) |
|
| Safety |
|
| Notes | *For information regarding the certification status of this series and the supported models, please contact our sales department. |
| Use Case Examples | Introduction of Products by Application (PDF) |
If you are looking for Products other than the above specifications, please contact our sales team.
Contact Form
UxONT 200W Series (UxONT3200) is a 200W-class AC-DC switching power supply (open-frame / board-type power supply) for medical equipment. With a compact 3" x 5" PCB size, this series is designed to facilitate power selection and implementation for equipment integration.
In addition to efficiency (up to 92%), PFC (power factor), protection circuits, and emission/immunity requirements, the specifications also summarize key adoption conditions such as SEMI F47 (with input conditions), OVC III (2000m), and operating altitude up to 5,000m (safety standards vary depending on the model classification).
| UNIFIVE Reasons to Choose: As a power supply manufacturer with over 35 years of development experience, we provide comprehensive support from specification review, certification acquisition, and mass production launch to post-production follow-up, with mass production in mind. Based on standard products, we offer flexible supply from small-lot prototyping and evaluation to small- and medium-scale production, as well as large-volume production. We also support semi-custom solutions and assist with power supply selection from the specification review stage toward mass production adoption. |
Key Features
1) Compact 3" x 5" 200W-class board power supply for medical equipment
Designed as a standard built-in power supply for medical equipment, emphasizing mountability with a 3" x 5" PCB size.
2) Technical standards and protection circuits
Safety standards vary depending on the model classification (M / H / N) (please check the applicable conditions for each model). Protection circuits include short-circuit protection / overvoltage protection / overcurrent protection / Brown-in and Brown-out protection.
3) Efficiency and PFC (power factor)
Efficiency: up to 92%
4) EMC (emissions)
Compliant with FCC Part15-B / Part18-B, EN(CISPR)55032-B / 55011-B / 55014-B, BS EN 55032 / 55011 / 55014-1 (conditions apply when an AC inlet filter is installed in the user's metal enclosure)
5) Immunity
Based on requirements such as EN55035 / BS EN 55035, EN60601-1-2 / BS EN60601-1-2, EN55014-2 / BS EN55014-2, and compliant with EN61000-4-2 / -3 / -4 / -5 / -6 / -8 / -11 immunity items.
6) Specifications useful for organizing adoption conditions (dust environment requirements, SEMI F47, OVC III, altitude, warranty)
Consideration for requirements assuming dusty environments, SEMI F47 (effective at input >200V), OVC III (2000m), operating altitude up to 5,000m, 5-year warranty, etc.
Effective Implementation Cases
- When a 200W-class built-in power supply for medical equipment is required and implementation design is to be carried out with a 3" x 5" board power supply
- When selecting a power supply based on efficiency and thermal conditions, assuming an efficiency requirement of up to 92%
- When organizing input-side conditions including PFC (power factor) to refine equipment specifications (power quality)
- When organizing protection requirements including Brown-in / Brown-out to reduce operational risks considering input fluctuations
- When establishing EMC design and evaluation prerequisites early based on emission and immunity requirements
- When determining adoption feasibility based on installation environment conditions such as altitude, OVC III, and dusty environments
Applications and Use Cases
Applicable to various I.T.E. / AV equipment.
Representative examples:
- Industrial equipment
- Medical equipment
- Home appliances and consumer devices (equipment assuming 60335 requirements)
- Information and communication equipment / peripheral devices, etc.
*The above are examples and do not limit applications.
Standards and Compliance
| Item | Details |
|---|---|
| Technical standards | Model classification: M (60601-1) / H (61558-1 / 60335-1) / N (62368-1 / 60065-1 / 60950-1) *Varies by model |
| Efficiency | Up to 92% |
| PFC (power factor) | ACIN100V: 0.95, ACIN230V: 0.9 |
| EMC (emissions) | FCC Part15-B / Part18-B, EN(CISPR)55032-B / 55011-B / 55014-B, BS EN 55032 / 55011 / 55014-1 (with conditions) |
| Immunity | EN55035 / BS EN 55035, EN60601-1-2 / BS EN60601-1-2, EN55014-2 / BS EN55014-2, EN61000-4-2 / -3 / -4 / -5 / -6 / -8 / -11 |
| Protection circuits | Short-circuit protection / overvoltage protection / overcurrent protection / Brown-in and Brown-out protection |
| Operating environment | Input: AC100-240V (tolerance: AC90-264V), 50/60Hz (tolerance: 47-63Hz) / Operating temperature: -10-70C (see derating) / Storage temperature: -20-85C / Operating and storage humidity: 5-95%RH (no condensation) |
| Others | SEMI F47 (effective at input >200V) / OVC III (2000m) / Operating altitude up to 5,000m / 5-year warranty / RoHS 2 compliant |
Semi-Custom Support
Please feel free to contact us for specification confirmation, quotations, or sample inquiries. You can review semi-custom case examples on the Customization Case Studies page.